Hydrothermal synthesis,thermal decomposition and optical properties of Fe2F5(H2O)(Htaz)(taz)(Hdma)

Crystal structure of Fe₂F₅(H₂O)(Htaz)(taz)(Hdma) which crystallizes in the triclinic system space group $\text{P}\overline{1}$ with unit cell parameters a = 8.8392(5) Å, b = 9.1948(5) Å, c = 9.5877(5) Å, α = 82.070(3)°, β = 63.699(3)°, γ = 89.202(3)°, Z = 2, and V = 690.91(7) ų, was synthesized under hydrothermal conditions at 393 K for 72 h, by a mixture of FeF₂/FeF₃, 1,2,4-triazole molecule (Htaz), and hydrofluoric acid solution (HF 4%) in dimethylformamide solvent (DMF). The main feature of this material is the coexistence of two oxidation states for iron atoms (Fe²⁺, Fe³⁺) in the unit cell, which associate by opposite fluorine corners of FeF₅N and FeF₂N₄ octahedra, and/or triazole molecule which originates the 2D produces material. The structure determination, performed from single crystal X-ray diffraction data, lead to the R₁/_WR₂ reliability factors 0.031/0.087. Thermal stability studies (TG/DTG/DTA) show that the decomposition provides in the temperature range 473–773 K and no mass loss was detected before 473 K. Mass spectrometry (MS) has been used. The optical absorption of the solid was measured at the corresponding λ_max using UV–vis diffuse-reflectance spectrum.     

Coordinate Bond Breaking Induced by Collapse of Poly(\begin{document}$N$\end{document}-isopropyl acrylamide) as Ligands of a Rare Earth Complex

A novel water-soluble luminescent complex consisting of Eu(ally-dbm)\begin{document}$_3$\end{document}-2Tppo and poly(N-isopropyl acrylamide) (PNIPAM) is synthesized through a series of chemical reactions. The structure of the complex is characterized by TGA, GPC, HNMR, and the thermal-responsive fluorescence of the complex in aqueous solution is investigated. It is found that PNIPAM collapse above the lower critical solution temperature causes the coordination bond breaking, leading to weakening of the fluorescence from Eu\begin{document}$^{3+}$\end{document} and enhancing of the fluorescence from the ligands. When temperature decreases, the fluorescence from Eu\begin{document}$^{3+}$\end{document} is found to boost up and the fluorescence from ligands weakens accordingly. It is deduced from this phenomenon that the ligands re-coordinate with europium ions again along with the temperature decreasing, which is further confirmed by IR measurements. This thermal-responsive fluorescence is of reversibility, which can be used as molecular probes for biological imaging and collapse studying of PNIPAM.     

Switching of heating and cooling modes using thermal radiation films

We study emissivity (ε)-dependent radiative heat transfer phenomena in remote and contact configurations. To demonstrate the emissivity-dependent radiative heating mode in a remote configuration, we fabricated miniature greenhouses covered with low (0.34)- and high-ε (0.86) polyethylene films and monitored temperatures on the floors, insides, and covers of the greenhouses during 24 h. The high-ε greenhouse yielded a 9-°C increase in floor temperature relative to the low-ε greenhouse at a one-sun solar irradiance because the high-ε film effectively trapped floor radiation. In contrast, the cover temperature remained lower in the high-ε greenhouse due to intensified radiation released from the high-ε film. This self-cooling effect was more evident when an emissive film was in physical contact with an object. While bare copper heated up to 55 °C, a high-ε film coated copper substrate was kept cooler by 4 and 2 °C compared with the bare and low-ε film coated copper samples, respectively.     

Orientation dependent size effects in thermal buckling and post-buckling of nanoplates with cubic anisotropy

In this work, a continuum model is presented for size and orientation dependent thermal buckling and post-buckling of anisotropic nanoplates considering surface and bulk residual stresses. The model with von-Karman nonlinear strains and material cubic anisotropy of single crystals contains two parameters that reflect the orientation effects. Using Ritz method, closed form solutions are given for buckling temperature and post-buckling deflections. Regarding self-instability states of nanoplates and their recovering at higher temperatures, an experiment is discussed based on low pressurized membranes to verify the predictions. For simply supported nanoplates, the size effects are lowest when they are aligned in [100] direction. When the edges get clamped, the orientation dependence is ignorable and the behavior becomes symmetric about [510] axis. The surface residual stress makes drastic increase in buckling temperature of thinner nanoplates for which a minimum thickness is pointed to stay far from material softening at higher temperatures. Deflection of [100]-oriented buckled nanoplates is higher than [110] ones but this reverses at higher temperatures. The results for long nanoplates show that the buckling mode numbers are changed by orientation which is verified by FEM.     

聚乳酸组织工程支架结构的精密调控

采用糖球模板法结合热致相分离技术,制备了孔径尺寸、内连通度及孔隙率高度可控的左旋聚乳酸(PLLA)支架材料,并通过扫描电镜(SEM)、红外光谱(FTIR)以及示差扫描量热法(DSC)对其空间结构及性能进行了系统研究.支架材料孔径从50μm到800μm及内连通孔径从10μm到200μm连续可调,微观孔壁结构根据不同溶剂可形成各异的微纳米结构.支架的制备对PLLA化学结构无显著影响,但相分离过程会不同程度地降低PLLA的结晶度.     

Structure,crystallization and dielectric resonances in 2–13 GHz of waste-derived glass-ceramic

Structure, kinetics of crystallization, and dielectric resonances of waste-derived glass-ceramic prepared via quench-heating route were studied as a function of dosage of iron ore tailing (IOT) within 20–40 wt% using X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and vector network analyzer (VNA) measurements. The glass-ceramic mainly consisted of ferrite crystals embedded in borosilicate glass matrix. Crystallization kinetics and morphologies of ferrite crystals as well as coordination transformation of boron between [BO₄] and [BO₃] in glass network were adjustable by changing the amount of IOT. Dielectric resonances in 6–13 GHz were found to be dominated by oscillations of Ca²⁺ cations in glass network with [SiO₄] units on their neighboring sites. Ni²⁺ ions made a small contribution to those resonances. Diopside formed when IOT exceeded 35 wt%, which led to weakening of the resonances.     

一种带疏水长链的水溶性偶氮引发剂的合成及端基疏水聚合物疏水缔合效应研究

以偶氮二异丁腈、十二胺为主要原料,通过Pinner反应制备了一种两端各带有12个碳烷基链的水溶性偶氮引发剂——2,2'-偶氮二异丁基十二脒盐酸盐AIBL.采用核磁氢谱、元素分析及液相色谱对AIBL进行了结构及纯度表征,采用TGA、DSC和紫外分光光度计研究了其热分解现象和热分解动力学,采用表面张力仪对其表面活性进行了测定.结果表明,所合成的引发剂AIBL具有预想的结构和较高的纯度,其热分解反应属于一级反应,热分解活化能为134.80 k J/mol,70℃下水中的半衰期约为4 h;AIBL在水溶液中具有表面活性,其临界胶束浓度为0.13 g/L,对应的表面张力为33.57 m N/m.以丙烯酰胺为单体、AIBL为引发剂制备了水溶性端基疏水聚合物SPAM.采用溴化法研究其转化率,应用乌氏黏度法、零切黏度法以及荧光探针对其缔合作用进行了研究.结果表明,AIBL具有良好的引发丙烯酰胺聚合的能力;相对于不带疏水长链的引发剂所合成的聚合物PAM,SPAM具有明显的疏水缔合效应,这说明AIBL成功地将疏水长链引入到聚合物的端基中,从而形成端基疏水聚合物.     

Temperature Effects on the Fracture Dynamics and Elastic Properties of Popgraphene Membranes

Popgraphene (PopG) is a new 2D planar carbon allotrope which is composed of 5–8–5 carbon rings. PopG is intrinsically metallic and possesses excellent thermal and mechanical stability. In this work, we report a detailed study of the thermal effects on the mechanical properties of PopG membranes using fully-atomistic reactive (ReaxFF) molecular dynamics simulations. Our results showed that PopG presents very distinct fracture mechanisms depending on the temperature and direction of the applied stretching. The main fracture dynamics trends are temperature independent and exhibit an abrupt rupture followed by fast crack propagation. The reason for this anisotropy is due to the fact that y-direction stretching leads to a deformation in the shape of the rings that cause the breaking of bonds in the pentagon-octagon and pentagon-pentagon ring connections, which is not observed for the x-direction. PopG is less stiff than graphene membranes, but the Young's modulus value is only 15 % smaller.     

手机虹膜识别镜头设计

随着近年来图像传感器的快速商用化以及生物识别算法的发展，虹膜识别功能得以应用于移动终端设备。获取虹膜图像是虹膜识别的关键一步，运用ZEMAX光学设计软件设计了一款适用于手机的虹膜识别镜头。该镜头采用豪威科技公司OmniVision_OV2281传感器，采用三片式非球面光学塑料设计，F数为2.3，全视场角为34°，在1/2奈奎斯特频率220 lp/mm处MTF值均大于0.39，且系统总长仅3 mm。根据ZEMAX像质评价方法以及公差分析结果可知，该镜头各项光学指标优良，具有像质好、体积小，质量轻、价格低、容易加工等特点。     

Investigation on thermal conductivity of graphene/Si heterostructure with different defect ratios and sizes

The thermal conductivity (TC) of graphene/Si heterostructures with different defect ratios and sizes was investigated using the molecular dynamics method. As the defect ratio of heterostructure increased, the TC decreased first sharply and then slowly under a high temperature stage. The TC of heterostructure also showed a significant size effect. This phenomenon was explained by phonon dispersion and flip competition. The phonon density of states for the graphene heterostructure with different defect ratios and sizes was obtained to understand the thermal transport mechanism. Analysis showed that with the increase in the defect ratio and when the flexural modes of the heterostructure became weak, the longitudinal and transverse modes gradually dominated the phonon transport. This phenomenon can be explained that the Si atom vibration was harder in the vertical plane than that of graphene. The vibration mode hindered the heat carrier of graphene and affected heat transport to the heterostructure.